Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 10, 2012 12:01:50 GMT -5
this is freaking awesome
|
|
aeobsession
New Member
West Coast Florida Chapter Member
Posts: 40
|
Post by aeobsession on Nov 11, 2012 17:22:50 GMT -5
good job guys its lookin sexycant wait to see the finished product keep it up
|
|
|
Post by quico217 on Nov 11, 2012 18:19:04 GMT -5
Great work guys ive been doing pretty much the same just built the motor today. And im painting it right now (6:16pm) lol i know you used a shit load of that effex paint lol still no luck on me finding that radiator what year make/ model i was thinking of getting a integra rad but the hoses are in the wrong spot
|
|
|
Post by Black20vtop •_• on Nov 12, 2012 0:09:56 GMT -5
Thanks u guys its all coming along together and a really big help From my brother jay. All i want is no more problems! Lol. Quico: yea we use about 4 or 5 cans of effex and the radiator i bought On ebay search it as 93-97 corolla radiator
|
|
|
Post by chik0 on Nov 12, 2012 1:31:48 GMT -5
omfg that looks SEXXX!!!!
|
|
|
Post by Black20vtop •_• on Nov 12, 2012 11:02:11 GMT -5
U will b suprise how it will look like wen its done chiko. stocker fresher bay.. And Xpecially motor too lol
|
|
|
Post by 4agpwr1 on Nov 13, 2012 1:38:41 GMT -5
Well, we are going back together...Lil slower then i expected.Some slight Hic-ups here and there but getting there i aiming to have her back together for this weekend, but No promises, engine bay has lots of day time for curing of the paint so johnny is just getting all the little nick-nacks together Herea a pic of some todays progress
|
|
|
Post by 4agpwr1 on Nov 13, 2012 2:00:20 GMT -5
And for a Lil Up to speed on the specs of this refresh THE BOTTEM END: Rehoned cylinder walls Replaced all bearing Mains,Rods and thrust washers with ACL RACE BEARING Replaced the piston rings with a premium chrome plated set New crank and rear main seals ARP Head Studs Head Work (nothing crazy) Refresh, 3 Angle Valve Job New Valve Seals Valve Lash Reset Shaved the head 10thousands, increases cylinder pressures by 10% (acording to the information from machineshop) & obviousely new head gasket, intake, exhaust...ETC Engine Bay Degreased, pressure washed & sanded Here is the primer and the goldflake paint used The clear was the CLear Effix
|
|
|
Post by ae101rolla on Nov 13, 2012 21:37:40 GMT -5
Seeing this makes me wana finish my build thread
|
|
aeobsession
New Member
West Coast Florida Chapter Member
Posts: 40
|
Post by aeobsession on Nov 14, 2012 13:25:08 GMT -5
^ yea i feel you i meant to start a build thread but life keeps throwin me curve balls but jonny u guys keep it up i wana see the car runnin round again soon
|
|
|
Post by greenrolla88 on Nov 14, 2012 20:43:52 GMT -5
hey which transmission is that? mines looks just like it. or do all the trans have the two starter bell housings?
|
|
|
Post by 4agpwr1 on Nov 14, 2012 23:41:44 GMT -5
Well if you own a C160 tranny then you will have a longer or wider as it is a 6spd tranny, other then that i think almost all toyota trannys are 2 bolt starter
|
|
|
Post by Black20vtop •_• on Nov 14, 2012 23:44:02 GMT -5
Yea i knw jorel.. Anxious to drive this lady and dying to hear the motor Roar thru the streets lol. But deff would see it around soon
|
|
|
Post by 4agpwr1 on Nov 15, 2012 21:19:02 GMT -5
|
|
|
Post by chik0 on Nov 16, 2012 0:26:42 GMT -5
jajajaja, that was greaaaat. ahhh man its looking niiiiice. thank you for the updates man.its looking awesome
|
|
|
Post by 4agpwr1 on Nov 18, 2012 18:36:03 GMT -5
Johnny hard work Almost Done Red Lady New Rotors, the old ones were SEVERLY WARPED
|
|
|
Post by BTCreations on Nov 18, 2012 21:57:46 GMT -5
Looking good homies! I need to do an updated visit.
|
|
|
Post by Chino Built on Nov 26, 2012 16:45:02 GMT -5
the car is looking good... nice job on the engine bay.....
|
|
|
Post by 4agpwr1 on Nov 27, 2012 1:30:30 GMT -5
I didnt really find that levin front end appealing but hey pics is proof of it being a front end whore...Lol As far as the bay being gold before....well.....this gold is MUCH BETTER....Lol So as moving in we been busy just havent had time to put some pics up so here are some of the latest up dates Working late into the nite and another set of googies came in Daytime shot of the filter socks The new and improved FPR by VIS Red Lady has landed and is now officially on the ground firing up is right around the corner Going back together now Gold view threw the grill And whola just bout ready for the Starting
|
|
|
Post by chik0 on Nov 27, 2012 1:44:07 GMT -5
omg, that is so orgasmic man, what a beast, and with those socks its like their smiling back, yes looks alot better, i would reccomend maybe an oil catch can. the gold stands out great, i dont think sibling rivalry 9 is ready for this, especially is sonic comes too, and you still planning on those deep offset rims?? as far as the levni front end, yes its definately different, looks weird on the four door but couldve looked sick if it had a lip or something, when i got the car i didnt get it with that front end, i got it the way it came n then my other jdm bumper that i had i sold it to abuelo anthony which he has on his white car now, i think the levin front end got sold for alot more money, and if im correct, the main thing that was used to modify it was the fenders, and yes it had a gold engine bay but it wasn't sanded down so it never looked as great as it looks now.
|
|