|
Post by acousticplays on May 7, 2013 23:41:41 GMT -5
I'm running 16x7's with +40mm offset at the moment. rolled fenders = no problem, clearing very well. I'm moving to 16x8's, +20mm offset. Bought camber bolts. An additional 1.75 degree negative camber in the rear, possibly will do it for the front too. Anyone running 16x8's with a similar offset? CAN IT WORK? ;D I'll be running 205/40/16 tires with the new wheels. This is how the current setup looks (I did not camber the wheels, it naturally did that after I lowered the car...so I'm guessing adding the bolts will add even more).
|
|
|
Post by kennydang91 on May 8, 2013 2:08:16 GMT -5
I know rincon is running the same size on an 8th gen. He could give you some insight on that
|
|
|
Post by gold94corolla on May 8, 2013 6:23:10 GMT -5
Anything will "fit" with enough work! Just make sure you roll the fenders flat and pull what you can pull before you start messing with the camber.
|
|
|
Post by Rinconrolla on May 8, 2013 10:12:27 GMT -5
I'm running 15 x 8 and 20 offset , With 195/55/15 tires , but you can do 195/50/15 so sit lower . I know Reynaldo has 16x8 don't know his tires size but in my case I don't rub
|
|
made007
New Member
Puerto Rico Chapter Member
Posts: 27
|
Post by made007 on May 8, 2013 22:42:17 GMT -5
I'm running 15 x 8 and 20 offset , With 195/55/15 tires , but you can do 195/50/15 so sit lower . I know Reynaldo has 16x8 don't know his tires size but in my case I don't rub Do you have pics of your car wheels? I want to see the tire, im waiting for some Rota Aleica 15x8 +10 offset, but i dont know what tire should i buy, i dont want it to be too thin, you know streets on puerto rico arent the best
|
|
|
Post by Rinconrolla on May 9, 2013 9:10:30 GMT -5
I'm running 15 x 8 and 20 offset , With 195/55/15 tires , but you can do 195/50/15 so sit lower . I know Reynaldo has 16x8 don't know his tires size but in my case I don't rub Do you have pics of your car wheels? I want to see the tire, im waiting for some Rota Aleica 15x8 +10 offset, but i dont know what tire should i buy, i dont want it to be too thin, you know streets on puerto rico arent the best This is on my wifes car I have the same wheels but I use a 195/55/15 cause I needed it a little higher . corollacarclub.proboards.com/index.cgi?board=suyr&action=display&thread=194&page=4.
|
|
made007
New Member
Puerto Rico Chapter Member
Posts: 27
|
Post by made007 on May 9, 2013 14:09:18 GMT -5
Those are 195 50 15 on your wifes car right? Yeah i like those , thanks man
|
|
|
Post by mindbeats on May 9, 2013 15:03:55 GMT -5
16x8 should be fine. I wanna get the xxr002 with the 3.5 lip and they only come with 16x8. A little tug and pull on the fender and ill be gd to go ðŸ˜ðŸ˜œðŸ‘
|
|
|
Post by Rinconrolla on May 9, 2013 18:47:00 GMT -5
|
|
made007
New Member
Puerto Rico Chapter Member
Posts: 27
|
Post by made007 on May 10, 2013 9:24:48 GMT -5
Ok thanks
|
|
|
Post by mindbeats on May 10, 2013 12:13:25 GMT -5
I believe this corolla had 16x8
|
|
made007
New Member
Puerto Rico Chapter Member
Posts: 27
|
Post by made007 on May 19, 2013 18:32:21 GMT -5
|
|
|
Post by gold94corolla on May 19, 2013 18:47:24 GMT -5
Looks like it doesn't fit lol.
|
|
|
Post by akuma64 on May 19, 2013 20:26:41 GMT -5
lol man.. well im a firm believer that the 15,17 x 7.5 with a moderate amount of offset looks best. Granted a 16 x 8 does look good but i would rather not have to ave more camber than i comfortable with...and without camber..it looks wierd to me...but that my opinion.
|
|
made007
New Member
Puerto Rico Chapter Member
Posts: 27
|
Post by made007 on May 19, 2013 20:58:34 GMT -5
Looks like it doesn't fit lol. Yeah, i was thinking cutting it to make it thin
|
|
|
Post by 7thgen7a on May 29, 2013 20:45:47 GMT -5
15x7 15mm offset xxr 513(banana sport). No camber bolts and rolled fenders it rubs alittle and alot ehen loaded.. This is on my 7th gen , you may be able to fit it better if you get the adjustment for the rear toe and put it in front so you will have full rear adjustment.
|
|
|
Post by 7thgen7a on Feb 9, 2015 1:13:08 GMT -5
|
|
|
Post by mindbeats on Feb 9, 2015 15:26:35 GMT -5
I got 17x7's now and got +25mm offset. If it wasn't so freaking cold I'd do it. Just have to wait and see.
|
|
|
Post by Rinconrolla on Feb 9, 2015 20:52:19 GMT -5
I have A 15 X 8 20 OFFSET with a 195/55/15 tire -
|
|
|
Post by trife96 on Feb 10, 2015 12:27:34 GMT -5
Kiwi run's 16x8 with like a 15 offset and that's pushing it. But I've read he didn't have any issues so 20 offset should be less of an issue.
|
|