|
Post by sk1lled on May 23, 2013 10:44:41 GMT -5
Whats up guys, my name is David. i was introduce to this website by Chino. I have a 94 corolla with a silvertop 20v that i've recently just put in without doing any research about the swap lol. So i ran into some problems. when i drive and i make turns my steering wheel jerks side to side and sounds like the axle is about to break. i have the silvertop 20v axle on the passenger side, but for the driver side i have the stock axle. i heard that a 98-99 rav4 axle would fit for the driver side. but when i went to USA industries they said there are 3 different kind of axles that is made for a 98 rav4. Does anyone know which one of the axles is it from the 98 rav4?
here my swap
|
|
|
Post by sk1lled on May 23, 2013 10:46:57 GMT -5
This is my before picture
|
|
|
Post by 305rolla on May 23, 2013 13:27:27 GMT -5
When me and wickedtoyz did the swap on 95rolla we used his stock axles he had a 7afe itb auto trans
|
|
|
Post by trife96 on May 23, 2013 14:00:39 GMT -5
The stock axles should work... I ended up using the RAV 4 axle for the outer shaft and intermediate bearing, however, the inboard shaft to the trans has different splines. The inboard shaft can easily be swapped. But the trick is finding the inboard shaft to the tranny from a 20V. I was lucky and found someone who sold it to me a while back on TN. read this thread: corollacarclub.proboards.com/index.cgi?board=ae111&action=display&thread=519
|
|
|
Post by greenae102 on May 23, 2013 16:31:25 GMT -5
i using both of the 5sp 7afe axles on my 7ag 20v...just over 45k miles on them and the only issue i had was breaking one while racing. no other issues tho
|
|
|
Post by sk149 on May 23, 2013 19:10:54 GMT -5
Stock 4afe axles work just fine I used them never had a issue
|
|
|
Post by sk149 on May 23, 2013 19:28:25 GMT -5
This is a straight silver top btw? I ask because I don't see the maf sensor
|
|
|
Post by Rinconrolla on May 23, 2013 22:15:32 GMT -5
Love it
|
|