|
Post by Rinconrolla on Jan 21, 2015 7:58:37 GMT -5
Let me start out by saying - My Camry timing belt stretched so I replaced the water pump and belt - After a month of driving I noticed my tempeture gauge was running a little hotter then normal so I went to go replace my thermostast - while I was filling it up I had the heater on and there was no heat coming out and the car went all the way up to 3 quarters - So I put the old thermostast back and car went back to normal and I had heat again - then a week later the car went to running warm again - So I bought another thermostast thinking the first one was a failure - Same thing when I put the new thermostast the heat didn't work and the car rose up to three quarters hotter and over heated - So I went to go put the old thermostast back and now with that one its still over heating and no heat - WTF
So I took out the thermostast and car runs and heat works but I hate running a car without a thermostast - There is NO bleeder valve for this model -
Does anyone have a idea what it can be ??
.
|
|
|
Post by 7thgen7a on Jan 30, 2015 1:00:17 GMT -5
You gotta have air in the cooling system bro. Try jacking the front of the car up with it running and check for air bubbles.
|
|
|
Post by Rinconrolla on Feb 1, 2015 20:34:45 GMT -5
Ok I will try that I will let you know if it works
|
|