|
Post by ae101cb on Sept 9, 2015 9:38:01 GMT -5
How can we adjust the caster on the 7th gen corollas?
|
|
|
Post by 7thgen7a on Sept 13, 2015 0:13:47 GMT -5
Only way I know how is to buy fully adjustable coilovers. Mine are the cheapest you can buy off eBay and are gold/yellow anodized aluminum. They have it all from camber to caster, and fully functional. But you can buy adjustable pillow mounts from eBay for like $75 bucks . hopefully this helps a little bit
|
|
|
Post by 7thgen7a on Sept 13, 2015 0:16:24 GMT -5
|
|
|
Post by 7thgen7a on Sept 13, 2015 0:20:30 GMT -5
|
|
|
Post by ae101cb on Sept 13, 2015 0:42:36 GMT -5
But the coilovers only says that adjust damper and camber not caster
|
|
|
Post by ae101cb on Sept 13, 2015 0:44:47 GMT -5
I cant see whats on the website you wrote. Is asking me to log in and I dont have a account for that website
|
|
|
Post by 7thgen7a on Sept 13, 2015 0:49:14 GMT -5
Sorry my bad. but the pillow mount can be mounted in the direction to gain the caster and the coilovers have a slight angle to gain a little.
|
|
|
Post by ae101cb on Sept 14, 2015 12:35:55 GMT -5
Thanks man
|
|
|
Post by Rinconrolla on Sept 14, 2015 19:34:24 GMT -5
you need a camber bolt kit then take it to your local place that does aligments This if you need caster But in all reality if you have stock struts you will be ok with the camber bolts - caster rarely has interference unless you have a coil over strut for the fronts cause caster doesnt exist in the rear .
|
|