|
|
Post by lukerolla on Jun 19, 2011 12:39:12 GMT -5
Hello. Im thinking about buying a 20v Silvertop or maybe a Blacktop not sure yet, but my question is: will I need to modify the motor mounts for a 1996 Corolla and what headers would I need to buy?
Cheers!
|
|
|
|
Post by eltipico on Jun 19, 2011 13:16:35 GMT -5
Welcome and wish I can help you, but ima take a guess from what I have read. If I remember correctly 3 of the 4 mounts line up, unless that was for a different toyota. It will be answered soon I'm sure.
|
|
|
|
Post by 305rolla on Jun 19, 2011 13:23:51 GMT -5
ok are u auto or 5 speed. if ur auto then yes on the transmission if your going to do a 5 speed swap if im not mistaken the 5 speed for the 7th gen will work. if going auto to auto then no. got to get the wire harness modify to work. mr220v does great work. need a longer throttle cable also. you can get from a celica. the header if ur lucky to find 20v with jasma header then get that one cause i seen them on ebay with them and they are great header for the 20v. or you can just get a 4age 16v header a modify the flange to fit just requires some cutting on the ends. also the axles you can use from 5 speed 7th gen for now until you find the ones for thr 20v.
|
|
|
|
Post by Rinconrolla on Jun 19, 2011 14:41:47 GMT -5
If a 7th gen CV shafts fit then why spend the money to get a 20v one ??
Plus you say get jasma headers , What year would he be buying for and what type of motor ?
|
|
|
|
Post by 305rolla on Jun 19, 2011 16:37:03 GMT -5
|
|
|
|
Post by Rinconrolla on Jun 19, 2011 17:32:21 GMT -5
Good info Andrew
|
|
|
|
Post by sk149 on Jun 19, 2011 20:10:35 GMT -5
Black top is better all motor and if you have a 5 speed Rolla then all mounts fit the same if you get a 5 speed 20v tranny if you get a 6 speed 20v tranny then you will have to modify mounts ... Either jasma headers or go get custom one made
|
|
|
|
Post by 305rolla on Jun 19, 2011 20:41:17 GMT -5
why do you guys keep putting headers if its only one lol it spelled header
|
|
|
|
Post by sk149 on Jun 19, 2011 20:56:46 GMT -5
Bad habit lol
|
|
sting
New Member
Philippines Chapter Member
Toyota Region 3
Posts: 23
|
Post by sting on Sept 16, 2011 18:52:05 GMT -5
if your body code is an ae101, then there would be no mounting issues if the engine was an MT...
|
|
Aww man, at least you tried. What are you planning to try next?
