DIY Rear Fog Light for eudm ae101

[KING7thGen]

just wanted to share the work of eu101, a fellow TR3 member, whose done a rear fog project on his eudm ae101...

for those who want to put a rear fog but can't afford to buy the real thing...

things needed...

1. screw driver
2. scissors
3. double adhesive tape
4. old dvd case
5. carton (for measuring)


step 1: take off parts that need to be taken off...




step 2: pull the tail lights outwards...


step 3: cut the green wire w/ white stripes and tap it with the pure green wire...


step 4: take off the bulbs... make a covering for the inside of the tail light


this is the size of the tip because the surface is uneven inside the tail light...


step 5: stick double adhesive tape at the covering that was cut out that was used inside the tail light, use a screw driver to make it easier...


place the plastik cover inside...


step 6: repeat step 1 in reverse and test it if it works... noticed that there is only one tail light with the rear fog light (as per euro spec on ae101's)...


hope this helps...