Post by asg14 on Nov 26, 2011 22:02:06 GMT -5
Installing a Cabin Air Filter into a Gen 3 (And maybe Gen 4) Camry.
1: Pull down the carpet on the drivers side center console.
2: Locate the rectangle access panel. There are 2 clips holding it. Simply pull the plastic clips towards eachother, pull outward, and the panel will come off.
3: Pic of Filter.
4: Install upper piece of the filter. Slide it in, tab outward. Once it's fully pushed in, push it UP, untill the tab hits the top. Then take piece 2, tab outward, and push it fully in underneith.
5: Put the access cover back and, and lift the carpet back up.
1: Pull down the carpet on the drivers side center console.
2: Locate the rectangle access panel. There are 2 clips holding it. Simply pull the plastic clips towards eachother, pull outward, and the panel will come off.
3: Pic of Filter.
4: Install upper piece of the filter. Slide it in, tab outward. Once it's fully pushed in, push it UP, untill the tab hits the top. Then take piece 2, tab outward, and push it fully in underneith.
5: Put the access cover back and, and lift the carpet back up.
Aww man, at least you tried. What are you planning to try next?
