|
|
Post by Turbo1zz on Dec 22, 2011 23:50:39 GMT -5
 Juan aka Blackfoot 9546656909 Everything under this hood has to go Alternator-$60.00 Starter-$50.00 Exhaust manifold-$30.00 Intake manifold-$60.00 Power steering pump, lines, and reservoir-$80.00 A/c compressor and lines-$60.00 1zzfe head-$150.00 The block has a crack in it so its no good but if you want it for any reason give me $50.00 The transmission is 5spd I will sell it as a conversion kit for anyone that wants to get a 5spd swap for their corolla. You will take everything needed!! C50 Transmission Axles Ecu All lines and cables Harness Screws, nuts, etc..... $1,200 for the parts or $1,800 including labor to do the swap. I will not sale anything that has to do with the transmission separate |
|
|
|
Post by sk149 on Dec 23, 2011 14:09:16 GMT -5
That's perfect I know there is mad people looking to do a manual swap someone should hop on this
|
|
|
|
Post by akuma64 on Dec 23, 2011 15:59:42 GMT -5
manual swap will only ffit pps right? will it work for 97 model?
|
|
|
|
Post by akuma64 on Dec 23, 2011 16:00:59 GMT -5
wait sorry i didnt tpe that right lol. i meant 99s like modl wise...does it come with eveerything needed? or will i still need to get extra like ECU and such. i have a 97
|
|
Wickedtoyz
New Member
Don't underestimate what you don't know
Posts: 1
|
Post by Wickedtoyz on Dec 23, 2011 22:09:28 GMT -5
The swap is everything you would need to convert a 8th gen corolla to a 5speed.
The parts are as follows:
5 speed ecu
C50 transmission
Shifter cables
Shifter assembly
Brake pedal
Clutch pedal assembly
Clutch master cylinder
Clutch hydraulic lines(hard lines and rubber lines)
Clutch slave cylinder
Flywheel w/bolts
Clutch
Clutch pressure plate w/bolts
Throw out bearing
Driver and passenger axles
Transmission mounts (3)
Shifter boot
shift knob
Engine harness
Add all that up and it comes out to way more then what is being asked..
|
|
|
|
Post by akuma64 on Dec 23, 2011 22:22:57 GMT -5
oh.......lol o well. just wandering..
|
|
|
|
Post by sk149 on Dec 26, 2011 23:02:54 GMT -5
Out of all the things that Gino posted up the things that wouldn't work for you is the tranny, clutch, Ecu, harness, flywheel, and pressure plate ... Everthing else should be fine even the axels ... Because my boy that did a 20v swap in a 8th gen said that the axels from the 8th gen fit in the 20v tranny no problems
|
|
|
|
Post by akuma64 on Dec 26, 2011 23:36:30 GMT -5
haha i kno right!! lol its like..what are the odds? haha o well its cool lol ill find them someday.(seems easy for everyone else it seems haha)
|
|
|
|
Post by Turbo1zz on Dec 28, 2011 21:10:37 GMT -5
I know that c50 transmission is a very common transmission for Toyota. The difference between years would be the gear ration, I can't guarranty that it will for any other gens but if you find out that your engine fits a c50 transmission this will work.
|
|
|
|
Post by sk149 on Dec 29, 2011 3:49:49 GMT -5
I was thinking the same since the axels for this tranny fits a 20v which means it fits the 7a/4afes as well
|
|
|
|
Post by Rinconrolla on Dec 29, 2011 9:54:57 GMT -5
I was thinking the same since the axels for this tranny fits a 20v which means it fits the 7a/4afes as well The 8th gen and 7th gen use the same CV axles . ;D |
|
|
|
Post by sk149 on Dec 29, 2011 15:23:25 GMT -5
I was thinking the same since the axels for this tranny fits a 20v which means it fits the 7a/4afes as well The 8th gen and 7th gen use the same CV axles . ;D What did I say? Lmao |
|
|
|
Post by alxcorolla99 on Jan 9, 2012 14:26:08 GMT -5
That's a c50 5 spd?
|
|
|
|
Post by akuma64 on Jan 9, 2012 16:55:16 GMT -5
so.....everything will fit? lol if i were to get all of this..i would work?...i might be better off just waiting till i run across someone who has a complete swap for 7th gen....I hate how everyone is able to just boom pow! i have new tranny...i have looked everywhere....  its all good tho! thanks for the help! |
|
|
|
Post by Y2kturbocorolla on Jan 15, 2012 2:40:18 GMT -5
Do you still have that swap for sale cause I might have to jump on that but the only issue would be to ship it
|
|
|
|
Post by sk149 on Jan 15, 2012 6:25:39 GMT -5
The biggest and only issue i see would be the tranny probably will have to send that separate from everything else
And you would probably want to buy the axels new as long with the clutch(considering your turbo Rolla is going to need a higher stage clutch) pressure plate and flywheel(might want a lighter one for your build) ijs
|
|
|
|
Post by Y2kturbocorolla on Jan 15, 2012 12:36:10 GMT -5
Very true its so hard to find a 5 speed 8th gen out here I've been looking
|
|
|
|
Post by alxcorolla99 on Jan 30, 2012 11:41:27 GMT -5
As for interior, do you have the front right door panel? and if you do is it manual windows?
|
|
|
|
Post by akuma64 on Jan 30, 2012 13:03:16 GMT -5
for me 7th gen lol any gen to be honest haha...alll autos down here...
|
|
Wickedtoyz
New Member
Don't underestimate what you don't know
Posts: 1
|
Post by Wickedtoyz on Jan 30, 2012 20:04:37 GMT -5
Car Is Sold
|
|
its all good tho! thanks for the help!
Aww man, at least you tried. What are you planning to try next?
