DIY MSD Modification Corolla 93 - 97

[KING7thGen]

hello if you wander on how to or what you need for your 7gen corolla, Pedro and me(Efrain) are going to install an msd on my car base on he's car on the parts that he got, here is some pic of the parts I got, I will post pic ones we start the installetion
and again sorry is enyting is miss pell


and this is something that you are giong to need in order to work
ok new pic do not get the 8910 get the 8910-EIS(electronic ignition system)Tach Adapter looks the same but the 8910-EIS is the wan that work with ours cars, the one in the first pic is the one that you wants, look at the wires that plugs in to the 6al msd
MSD8910-EISTachAdapterBlaster

MSD 8910 Tach AdapterBlaster SCI Series Ignition



MSD make spark plug wires 8.5MM (SUPER CONDUCTOR WIRE SET) for our cars part no. (32649) Corolla/Prizm, 1.8 DOHC, IT WILL WORK ON 1.6, wire come with special adapters to work on our distributor cap the look almost like the power tip, no driling all the do is plug in to the sucket so you can use the msd wire



This blaster ss coil is best choise better result at dyno compare to a blaster 2 coil info from (pnyk33)pedro

I move the battery to the trunk(make sure to use 4 ga or 0 ga wires) and thanks to the space I even trow some hid h3 8000k for the projectors
(WARNIG) DO NOT INSTALL BATTERY ON THE TRUNK ON LESS YOU HAVE A DRY CELL BATTERY LIKE OPTIMAS OR ODDESY, DO TO GASES AND ACID SPILLS OF A REGUALAR BATTERY



OK SO FAR THIS IS WHAT YOU NEED
MSD LIST
1. MSD 6AL PART No.6420
2. MSD BLAST SS COIL PART No.8207
3.MSD 8910-EISTachAdapterBlaster PART No.8910EIS
4.MSD spark plug wires 8.5MM (SUPER CONDUCTOR WIRE SET) PART No.32649
5.MSD Power Tip, Mod. Internal Coil Caps,Honda PART No.8803 YES IT SAYS HONDA BUT THIS IS THE RIGHT PART TO DO THE MOD ON DISTRIBUTOR CAP
THIS IS A MSD HONDA CAP WHAT I WANT TO SHOW YOU IS HOW IS GOING TO LOOK WITH THE MSD POWER TIP
I got this one it came with the wire for the coil it will work the same need longer screw
HEI Coil Wire, Blaster 2, Super Conductor PART No.84039
MAKE SURE THAT YOU HAVE AN ADJUSTEBLE DISTRIBUTOR OR YOU ARE GOING TO NEED A MSD 6BTM PART No. 6462 (adjustable boost/timing retard circuit to prevent detonation)








VIDEO REVING THE INGEN AT 5500 JUST TESTIN THE CHIP MODULE I HAVE IT AT 6500 NOW

thanks to Pedro for all the help and iformation

[kellon900]

hey, am working on a project converting to msd blaster coil only, sadly i cannot see you pics can some how get it to me