Post by kickfli12 on Feb 17, 2013 17:17:45 GMT -5
first off, this isnt the best DIY write up ever so a lot of it will be written out.
so youll need some power tools like a skill saw, grinder, and/or a lot of patience.
i got the lip off a 96 integra at the junkyard for $10
first cut out the weird center part
should look like this
then youll want to cut the other parts that stick up so it will be completely flat across the top and look like a normal lip
now youll have to cut off the part that sticks out if you're looking down at it (lip sitting on the ground as if its on the car) so it will sit flush against the bumper
flip it over and cut off most of the excess splash shield. i cut a lot of mine off so the lip would have some flex if i needed it since i didnt know how all this would work out. you're almost done now.
next you will use the grinder to shave off all the little tabs on the inside of the lip. there will be these weird plastic things that nothing attaches to that you'll need to shave off as well cause if you dont it wont sit flush against the bumper.
now with some double sided tape and some self tapping screws you can mount it up and it should look something like this
enjoy! sorry this DIY sucks. at the time i was doing all this i wasnt thinking about a DIY so there aren't many pictures.
so youll need some power tools like a skill saw, grinder, and/or a lot of patience.
i got the lip off a 96 integra at the junkyard for $10
first cut out the weird center part
should look like this
then youll want to cut the other parts that stick up so it will be completely flat across the top and look like a normal lip
now youll have to cut off the part that sticks out if you're looking down at it (lip sitting on the ground as if its on the car) so it will sit flush against the bumper
flip it over and cut off most of the excess splash shield. i cut a lot of mine off so the lip would have some flex if i needed it since i didnt know how all this would work out. you're almost done now.
next you will use the grinder to shave off all the little tabs on the inside of the lip. there will be these weird plastic things that nothing attaches to that you'll need to shave off as well cause if you dont it wont sit flush against the bumper.
now with some double sided tape and some self tapping screws you can mount it up and it should look something like this
enjoy! sorry this DIY sucks. at the time i was doing all this i wasnt thinking about a DIY so there aren't many pictures.
Aww man, at least you tried. What are you planning to try next?
