|
Post by Rinconrolla on Apr 6, 2015 17:34:36 GMT -5
This is a DIY for a 2000 Infiniti I30 rear brakes First you remove the two bolts that hold the caliper to the bracket - If needed use a screw driver to take the caliper off - Then separate the pads from the rotors - Then remove the two bolts holding the bracket to the rear axle When putting on new rotors make sure they match - If using slotted rotors make sure you realized there is a left and a right Rear calipers on some cars have to be twisted back an not pushed - You will need a brake caliper tool - Match up the correct slots cause they do come in different sizes - Make sure when twisting you don't twist the rubber part it should twist easily Once you finished then you out everything back the same way you took it off . Some rear rotors have emergency brake shoes inside - In this case there are non More DIY @ rinconrolla98.blogspot.com/2015/04/diy-rear-brakes-and-rotors-2000.html .
|
|