Post by Rinconrolla on Apr 29, 2015 19:19:41 GMT -5
This is a DIY for a 2009 Toyota Rav 4 WITH OUT the 3rd row seating .
There is a difference in pads and rotors of you have 3rd row seating vs non 3rd row seating
First you remove the front pad and the caliper bracket so that you can access the rotor
In this DIY I'm putting on slotted rotors so make sure before you install the new ones that they are facing the correct direction and they are the correct size
Carefully push back the caliper
Replace the hardware kit
Remember to remove the old wear sensor from your old pad to your new one or if the hardware kit come with this clip then install the new one
Once you have completed everything then you put it all back together the same way you took it off .
More DIY at rinconrolla98.blogspot.com/2015/04/diy-2009-toyota-rav-4-front-brakes-and.html
.
There is a difference in pads and rotors of you have 3rd row seating vs non 3rd row seating
First you remove the front pad and the caliper bracket so that you can access the rotor
In this DIY I'm putting on slotted rotors so make sure before you install the new ones that they are facing the correct direction and they are the correct size
Carefully push back the caliper
Replace the hardware kit
Remember to remove the old wear sensor from your old pad to your new one or if the hardware kit come with this clip then install the new one
Once you have completed everything then you put it all back together the same way you took it off .
More DIY at rinconrolla98.blogspot.com/2015/04/diy-2009-toyota-rav-4-front-brakes-and.html
.
Aww man, at least you tried. What are you planning to try next?
