|
Post by Rinconrolla on Feb 3, 2016 12:02:39 GMT -5
This is a DIY for a 2011 Hyundai Sonata front brake replacement Two bolts hold these front pads , Once you remove these bolts then you can slide the brake caliper off the rotor - Make sure you replace all the hardware when putting your new pads To push the front caliper back you must either use the proper brake tool but in this case you can use a C - clamp cause you have to go in on a angle to push the piston back - be careful cause these calipers are made of aluminum Once you have everything off you put it on the same way - More DIY @ rinconrolla98.blogspot.com/.
|
|