Post by Rinconrolla on Apr 5, 2016 16:16:48 GMT -5
This is a DIY Gauge Cluster upgrade or replacement bulbs on a 2000 Toyota Camry
Remove the two screws then your gonna need a flat head screw driver on each ends then pull towards you
You will see four screws holding the gauge cluster
Twist and turn bulb out - Be careful you do not damage anything in the back of the cluster - Choose what ever color you wish to put in - Test before putting the cluster back that the LED are working
Then there you have it nice and bright
More DIY at rinconrolla98.blogspot.com/2016/04/diy-gauge-cluster-led-upgrade-bulbs.html
.
Remove the two screws then your gonna need a flat head screw driver on each ends then pull towards you
You will see four screws holding the gauge cluster
Twist and turn bulb out - Be careful you do not damage anything in the back of the cluster - Choose what ever color you wish to put in - Test before putting the cluster back that the LED are working
Then there you have it nice and bright
More DIY at rinconrolla98.blogspot.com/2016/04/diy-gauge-cluster-led-upgrade-bulbs.html
.
Aww man, at least you tried. What are you planning to try next?
