DIY 2000 Infiniti I30 Dual Radiator Fan Motor Assembly

[Rinconrolla]

DIY Replacement 2000 Infiniti I30 Dual Radiator Fan Motor Assembly
This is DIY for a 2000 Infiniti I30 Dual Radiator Fan Motor Assembly replacement .

If you notice that at a stop light your A/C gets hot but when you drive the A/C gets cool or your temperature rises slightly on a stop but lowers on the drive on a dual radiator fan that means the A/C condenser fan is NOT working - Both fans should come on when you have the A/C on no matter how cold your motor is that is a easy test .









Remove the clips that hold the intake and then all you have to do is remove the upper hose that is connecting to the radiator only - Then disconnect any electrical plugs - Remove the two bolts holding the assembly to the radiator









Pull the assembly up and out - Make sure you put the heat shield from the old assembly to the new on to keep the motor from burning out from your exhaust pipe - Reconnect the plugs - Put your A/C on to make sure both fans go on






This DIY did not take long








More DIY at rinconrolla98.blogspot.com/2016/05/diy-replacement-2000-infiniti-i30-dual.html






.