|
Post by Rinconrolla on Jun 5, 2016 9:17:25 GMT -5
This is a DIY on a 2000 Honda CR-V with a 2.4 motor This is real simple but a tight location for this pcv valve - You will see above the alternator and under the power steering pump it's really hard to see but you will see the hose that has a clamp - All you have to do is unbolt the part and put the new one - If the old one doesn't rattle that means it was clogged - Testing the new one make sure it rattles - If the old one rattles that means it was ok but still if you have 100,000 miles on the car or more and never changed it then why not More DIY @ rinconrolla98.blogspot.com/2016/06/diy-replacing-pcv-valve-2002-honda.html,
|
|