DIY Replacement of a 6x9 Rear After Market Speakers Corolla

[Rinconrolla]

This is a DIY for a 2005 Corolla replacing the rear factory speakers to aftermarket speakers .

The rears are 6 x 9 and to make it easier purchase a speakers adapters from ebay . Part Number is
SAK008_69 .

















This is a very easy DIY . Remove the bottom of the rear seat then from there you can start pulling the plastic covers off starting with the clips where the hooks of the seat is .

Then go to the side of the rear then you can pull up the rear deck be careful if you have a rear wing there is wires you need to unclip then in the front you need to umclip that light plug too .








Then you can start removing the factory speakers . be careful you don't hit the back window with your ratchet .




Speaker rear adapter number is SAK008_69







You can modify the speaker wire to the factory plug .








Install the adapters first then you can put the speakers in . Make sure the speakers are nice and tight and they do not rattle , If you still have a rattle use silicone to keep it from moving . Once you tested the speakers then you can start putting then car back together .






Make sure you plug all the wires back correctly .








.